
Care & support
Manuals, cleaning steps, installation needs, parts and new covers for your Nailism pedicure spas, and the quickest ways to reach us.
Talk to usManuals and catalogue
Each pedicure spa manual shows the parts of the spa, what the installation needs, the optional discharge pump and the daily and weekly cleaning. Our 2025 catalogue covers the full range.

| Clean Joy · Manual | PDF, 1.7 MB |
|---|---|
| Newyorker · Manual | PDF, 1.7 MB |
| Stiletto · Manual | PDF, 1.7 MB |
| LED Spa · Manual | PDF, 1.7 MB |
| New First Class · Manual | PDF, 2.0 MB |
| Nailism catalogue 2025 | PDF, 7.5 MB |
Keeping a pedicure spa clean
These steps come from our model manuals. Your state board’s sanitation rules apply as well.
Every day
- Remove the jet cover and clear any debris trapped on or behind it.
- Soak the cover in an EPA-registered disinfectant before putting it back.
- Run the whirlpool with a low-foaming detergent and warm water for 10 minutes.
- Run fresh water with an EPA-registered cleanser through the motor for 5 minutes.
- Rinse with fresh water.
Every week
- Fill the basin with hot water, add 3 to 4 tablespoons of a low-foaming agent and run the whirlpool for 5 minutes.
- Stop and let it sit for 5 to 7 minutes, then open the air control and run it for 5 more minutes.
- Drain completely and refill with warm water.
- Add an EPA-registered disinfectant as its label directs, run the whirlpool for 5 minutes and drain.
- Wipe away the remaining water with a soft cloth, and repeat the disinfecting round if needed.
Do not use chlorine or bleach products on the jet cover: they can damage the plastic and chrome.
Before a spa is installed
From the installation summary in our model manuals. Your plumber and electrician confirm the details for your room, and we plan the water, drains and power with your layout.

| Water supply | Hot and cold lines, 1/2″ each |
|---|---|
| Drain | 1-1/2″ drain; a discharge pump is optional |
| Power | 115 V, 60 Hz |
| Connections | A licensed plumber and a licensed electrician, following local codes |
| Floor | Level, and strong enough to hold the spa with a client seated |
| Clearance | Base set 22″ from the wall so the seat can fully recline |
New covers, same chairs
We make backrest and seat cover sets for pedicure chairs, and reupholster customer chairs, technician chairs, stools and salon sofas in the leather color you choose, from over 100 swatches.


After
Parts and accessories
Parts we have listed for our pedicure spas. Call either showroom with your model name for availability and fit.
Own an earlier model?
Earlier Nailism pedicure chairs include First Class, Spajoy, Water Joy and Yurijoy. Send us the model name and a photo, and we will tell you which parts and services are available.

- FRP pedicure bowl
- Glass bowl, gold or nickel
- Black-tip shower head
- Sanitizer
- Sonic Touch 3
- Luraco Magna cover
- Arm rest set for bench spas
- Hand pads, regular and large
- Pedicure bowl pad, ankle rest and wrist rest
- Backrest and seat cover sets for pedicure chairs
Talk to us
For service or warranty questions, call the showroom you bought from and have your model name and invoice ready. In Korean or English, by phone or message.
| New York showroom | 718-961-3000 42-33 162nd St BSMT Flushing, NY 11354 Directions: Nailism New York showroom |
|---|---|
| New Jersey showroom & factory | 201-944-8888 280 N Midland Ave, Building W, Ste 138 Saddle Brook, NJ 07663 Directions: Nailism New Jersey showroom & factory |
| KakaoTalk ID | Nailism |
|---|---|
| WeChat ID | nailism3523 |
| @nailismspa | |
| facebook.com/nailismspa |
Tell us about your salon
Leave your email and tell us about your room. We will reply with a written quote.
Prefer to talk? NY 718-961-3000 NJ 201-944-8888